Connectify Hotspot vs the Built-In Windows Hotspot: An Honest Comparison
Windows 10 and Windows 11 include a mobile hotspot. It is free, it is already installed, and for a lot of people it is entirely sufficient. So the fair question is not “which is better” but “when is the free one not enough?”
This is a comparison written by the people who make Connectify Hotspot, a Windows app that turns a PC into a Wi-Fi hotspot, so read it with that in mind, and check every claim, because they are all checkable. The honest summary: if the Windows hotspot does what you need, keep using it. There are five specific situations where it cannot, and those are the reason an alternative exists at all.
What They Both Do
Both turn a Windows PC into a Wi-Fi access point. You pick a connection, set a password, and other devices join it like any other Wi-Fi network, by typing the password or scanning a QR code. For the common case (sharing a home broadband connection with a phone or two when the router is out of reach), they do the same job, and the built-in one does it with nothing to install.
Setup · about two minutes
Get Connectify Hotspot running on your Windows PC
Three steps, no command prompt, no netsh commands to remember.
-
Install and open Connectify Hotspot
Run the installer and let the install finish. Connectify Hotspot opens on its own.
-
Pick what you are sharing
Choose the connection your Windows PC is already using, then set a hotspot name and password.
-
Start Hotspot
Your phone, tablet or console now sees the network name you just typed. Connect to that network like any other Wi-Fi.
Available for Windows 10 and 11
Where the Windows Hotspot Stops
Five limits come up over and over in support forums. None of them is a bug; they are consequences of how the feature was built.
- It caps at 8 devices by default. Settings has no option to raise it. A registry value (WifiMaxPeers) is reported to raise it on some PCs and to do nothing on others.
- It switches itself off. When no device has been connected for a few minutes, the hotspot stops. You can turn the power-saving option off, which helps, but adapter power management and Modern Standby will still take it down.
- It puts your devices on a separate network. Everything connected sits behind the PC on its own address range. This is why a Chromecast connected to a Windows hotspot cannot be found by your phone, and why local multiplayer and printer discovery fail.
- It will not share every connection. Some VPNs are not offered in the list at all (WireGuard-based ones such as NordLynx, for example), and neither are some tethered phones, USB modems and 4G/5G dongles.
- It cannot extend Wi-Fi. It creates a separate network with its own name rather than extending the one the PC is on, so it is no help for a weak signal in a back bedroom, a hotel room or a rental.
Where the Windows Hotspot Wins
- It is built in and free, with nothing to install.
- It can share over Bluetooth. Connectify Hotspot shares over Wi-Fi or Ethernet only.
- It runs on Windows on ARM (Snapdragon) PCs. Connectify Hotspot 27 needs a 64-bit Intel or AMD PC.
What Connectify Hotspot Adds
Connectify Hotspot is a separate application that runs the sharing itself. The differences that matter:
- No device limit of its own: your Wi-Fi adapter sets the ceiling. No idle timeout either: Hotspot Lite, the free edition, runs in timed sessions, and PRO and MAX keep sharing until you stop.
- Per-device controls, free in every edition: live traffic and data used for each device, internet access on or off for each one, and a gaming mode that opens the ports PlayStation, Xbox and Nintendo consoles need.
- More to share: a VPN or a USB-tethered phone in every edition, plus 4G and 5G modems with PRO. PRO also adds Wired router mode, which shares the PC’s internet out of its Ethernet port.
- Bridged mode (MAX), which places connected devices on the same network as the PC, so casting, local discovery and console multiplayer work.
- Wi-Fi repeater mode (MAX), which extends the network the PC is on: that is how a laptop acts as a Wi-Fi booster. It needs a Wi-Fi adapter that supports repeater mode.
- Ad blocking and a choice of DNS, including services that block known malware sites, for every connected device, including ones that cannot run a blocker themselves.
On Windows 7 or 8 there is no built-in hotspot at all, and Connectify Hotspot 27 does not run there either: Connectify Hotspot 2021 is the version for those PCs.
Which One Should You Use?
A straightforward way to decide:
- Use the built-in Windows hotspot if you are on Windows 10 or 11, sharing Wi-Fi or Ethernet, with fewer than eight devices that do not need to see each other, for short stretches. Also if your PC has an ARM processor or you need to share over Bluetooth.
- Use Connectify Hotspot if you need to share a VPN or a tethered phone the Windows list will not show, want to see and control each device, need gaming mode for a console, need more than eight devices and your adapter allows it, or need it to stay up all day (PRO). For extending a Wi-Fi signal or putting devices on your main network, you need MAX.
If you are not sure which category you are in, install the free version and find out in five minutes. It costs nothing and it will not interfere with the Windows one, though you should turn the Windows hotspot off before starting it, since running both at once causes intermittent failures.
Try Connectify Hotspot Before You Decide
Hotspot Lite, the free edition, shares Wi-Fi, Ethernet, a VPN or a USB-tethered phone, with per-device controls, gaming mode and ad blocking, in timed sessions. PRO removes the time limit and adds 4G and 5G modems, Wired router mode and your own network name. MAX adds Wi-Fi repeater mode and Bridged mode. That is more than enough to tell whether it solves your problem before you pay anything.
See for yourself which one fits: download Connectify Hotspot free and compare it against the built-in hotspot on your own setup.
Available for Windows 10 and 11

